Hisilicon Kirin 710 Flash Tool Free May 2026

Unlike MediaTek devices that use a single universal SP Flash Tool, Kirin devices often require specialized software. Here’s a look at the top tools used for Kirin 710 devices and how they work. 1. Popular Tools for Kirin 710

Huawei TF Kirin Tool

: A free utility used for one-click FRP bypass and bootloader management. hisilicon kirin 710 flash tool

Prerequisites:

Technicians use these tools for more than just installing software. Key features often include: Unlike MediaTek devices that use a single universal

TTool Pro

: Supports writing firmware in multiple modes, including Upgrade Mode , Fastboot Mode , and BROM Mode . It also features a secure method for writing BOARD firmware to prevent losing IMEI data. Power off the device completely

1. Power off the device completely.
2. For Kirin 710, you typically need to short the test point (two tiny contacts on the motherboard) OR hold the Volume Down button while connecting USB.
3. Connect USB to PC. Device Manager should show “Huawei USB COM 1.0 (COMx)”.

Software Testpoint:

This specialized feature allows a device to enter HUAWEI USB COM 1.0 (factory mode) without needing to physically disassemble the phone or use a hardware testpoint.

• Phase 1 (Fastboot/Recovery): Used for official OTA updates or partial firmware changes.
• Phase 2 (Emergency Download/Bootloader): Used when the phone is "hard bricked." This allows the computer to detect the device as a generic USB device (often showing as USB\VID_12D1&PID_3609 in Device Manager) to load a bootloader.