Jump to content
View in the app

A better way to browse. Learn more.
LSPDFR RUSSIA

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.
 Новогодние украшения

Mediatek Preloader Usb Vcom | How To Install Mtk Driver

To install the MediaTek (MTK) Preloader USB VCOM driver, you must manually add it as "legacy hardware" through the Device Manager

He plugged the USB cable into the PC but not the phone yet. He held the paperclip in the reset hole, pressing the hidden button, and while holding it, he plugged the USB cable into the phone. how to install mtk driver mediatek preloader usb vcom

Without this driver, your computer simply won’t recognize your device when it’s in “Preloader Mode”—leaving you stuck with error messages like “ERROR: STATUS_BROM_CMD_STARTCMD_FAIL” or an unrecognized USB device. To install the MediaTek (MTK) Preloader USB VCOM

Common issue

: If SP Flash Tool shows ERROR: STATUS_BROM_CMD_SEND_DA_FAIL or S_BROM_CMD_STARTCMD_FAIL , your driver is installed but the PreLoader handshake failed. Try a different USB port or cable. Right-click the device and select Update driver

  • Right-click the device and select Update driver.
  • Choose Browse my computer for drivers.
  • Select Let me pick from a list of available drivers on my computer.
  • Click Have Disk...
  • Click Browse... and navigate to the extracted driver folder. Select the .inf file (usually named android_winusb.inf or similar).
  • Click Open, then OK.
  • You will see a list of drivers. Select MediaTek PreLoader USB VCOM Port.
  • Click Next. If a warning pops up, click Yes/Install.

    • The bridge was built. The computer could now see the phone's deepest level of consciousness, the Boot ROM. The COM port number (COM4) was the address his flashing tool (SP Flash Tool) needed to send the firmware packets.

    Final Checklist for a Successful Install

    Some advanced users prefer libusb-win32 because it works well with both PreLoader and BROM mode. Here’s how:

    Look for your device

    in the Device Manager. It might be listed under "Other devices" with an exclamation mark, indicating it doesn't have the correct driver.

    Important Information

    Terms of Use

    I accept
    Яндекс.Метрика

    Configure browser push notifications
    Chrome (Android)
    1. Tap the lock icon next to the address bar.
    2. Tap Permissions → Notifications.
    3. Adjust your preference.
    Chrome (Desktop)
    1. Click the padlock icon in the address bar.
    2. Select Site settings.
    3. Find Notifications and adjust your preference.