Huawei P10 Lite Firmware Flash Tool Link Fixed Page

For flashing the Huawei P10 Lite , the primary official tool is HUAWEI HiSuite

Troubleshooting:

If IDT says "Handshake failed," reinstall the USB COM 1.0 driver or use a USB 2.0 port. huawei p10 lite firmware flash tool link

• Extract the ZIP to a folder (e.g., C:\HuaweiMT).
• Run HuaweiMultiTool.exe as Administrator.

• Click Start.
• The tool will detect the COM port automatically.
• Wait for the progress bar to reach 100% (approx. 8–10 minutes).
• The phone will reboot automatically.

Disclaimer:

Please be aware that flashing your device's firmware can potentially brick your device or cause data loss. Make sure to back up your data and follow the instructions carefully. For flashing the Huawei P10 Lite , the

1. Go to the XDA Developers forum (xda-developers.com).
2. Navigate to Forums > Huawei > Huawei P10 Lite.
3. Look for the sub-forum "Development" or "Original Development."
4. Search for threads titled "Huawei Multi-Tool" or "Unbrick Guide."
5. Download Firmware:

   A. Huawei Multi-Tool (Recommended for General Users)

   B. Huawei Update Extractor

   | Error Message | Cause | Solution | |---------------|-------|----------| | Command not allowed | Bootloader locked | Use PotatoNV to unlock (requires testpoint method). | | FAILED (remote: partition length get error) | Incorrect firmware (e.g., WAS-LX1A firmware on WAS-LX1) | Download the exact firmware version from Firmware Finder or AndroidHost. | | USB Device not recognized | Driver conflict | Uninstall Hisuite and all Huawei drivers, then reinstall only the USB drivers. | | verification failed (IDT tool) | Secure boot enabled | Use Multi-Tool instead, or flash a "Service ROM" with a hacked IDT loader. | | Phone stays in bootloop after flash | Missing cust or product partition | Manually flash the CUST.img and PRODUCT.img extracted from UPDATE.APP using fastboot commands. | Extract the ZIP to a folder (e