Philips 55put6002 56 Software Update -
To update the software for your Philips 55PUT6002/56 (6000 series 4K Smart TV), you can use either an active internet connection or a USB flash drive. Before starting, check your current software version by navigating to Menu > Setup > Software settings > Software information to see if a newer version is actually required. www.philips.ae Method 1: Update via Internet (Recommended)
. This guide covers the two standard methods to update your firmware. Method 1: Automatic Internet Update philips 55put6002 56 software update
. If the version on the website is higher, download the update file, which is typically a compressed Installation Steps Prepare the USB: Extract the contents of the downloaded To update the software for your Philips 55PUT6002/56
- You are on version older than
.180(pre-2020). - Apps say "Requires update to continue."
- You experience purple/green screen tint on HDR content.
Visit the official Philips Support Page for 55PUT6002/56 to check for the latest firmware version. You are on version older than
- Go to the official Philips support page (search "Philips 55PUT6002/56 support").
- Download the firmware file (named
autorun.upgor similar). - Copy the file to the root of the USB stick (not inside a folder).
- Turn off your TV and unplug it for 1 minute.
- Plug the USB stick into a USB port on the TV.
- Plug the TV back in and hold the power button on the TV (not remote) until you see a gear or “Updating” screen.
- Wait 10–30 minutes. Do not turn off the TV.
- When finished, remove the USB stick. The TV will reboot.
Philips 55PUT6002/56
If you own a , you know it’s a solid budget-friendly 4K TV. But like any smart TV, it needs occasional software updates to keep apps running smoothly, fix bugs, and improve HDMI performance.
