Zte F689 Bridge Mode Exclusive May 2026

ZTE F689

To set your to bridge mode, you typically need to access the web interface and create a new bridge-type WAN connection.

You have a fiber plan of 1Gbps or less.
You own a high-quality third-party router (ASUS XT8, GL.iNet, Ubiquiti UDM, etc.).
You want better control over your network than the ISP's default software provides.

❌ Do NOT do it if:

ZTE F689

The bridge mode feature allows the device to function exclusively as a modem, passing the public IP address directly to an external router . However, this feature is frequently restricted or hidden by ISPs like Claro through firmware locks or JavaScript scripts that disable the "Apply" button. Key Features of Bridge Mode zte f689 bridge mode exclusive

Bridge mode: the gateway hands the ISP public IP directly to another device (your router) by disabling NAT, DHCP, and firewalling on the modem/gateway. The ZTE acts purely as a modem/ONT interface.
“Exclusive” in this context implies the F689 is configured so only the downstream router receives the public IP and handles all routing responsibilities—no double NAT, no conflicting DHCP servers, and minimal layer-3 interference from the ISP device.

Many ISPs prioritize their own Quality of Service (QoS) inside the ZTE F689. This can conflict with your advanced router’s QoS. Exclusive bridge mode bypasses the ISP’s traffic shaping inside the modem, giving you raw, unfiltered bandwidth. ZTE F689 To set your to bridge mode,

Public IP Pass-through

: Enables an external router to handle PPPoE or DHCP negotiations directly. You have a fiber plan of 1Gbps or less

Open a browser to 192.168.1.1 (or the device’s LAN IP).
Login with admin credentials (default often admin/admin or printed on the modem).